
Blackstar Dept. 10 AMPED 3 100-watt Guitar Amplifier Pedal
Blackstar Dept. 10 AMPED 3 100-watt Guitar Amplifier Pedal
The Blackstar Dept. 10 AMPED 3 is a gig-worthy 100-watt guitar amp head that fits easily on your pedalboard. This floorboard amplifier faithfully re-creates the tone and feel of a traditional tube amp, with three distinct channels — with two selectable voices per channel — that range from high-headroom clean to saturated distortion. There’s plenty of sound shaping onboard, including a 3-band EQ, Presence, and Blackstar’s trademark ISF control. Three distinctively different power amp responses ensure an authentic amp-like feel to match the AMPED 3’s killer tone. You also get footswitchable Boost and Reverb, plus a high-quality effects loop, MIDI control, and 9-volt pedal power outputs. To top it off, this guitar amplifier pedal includes Blackstar’s next-gen Cab Rig DSP speaker simulation. Best of all, when you find a sound and setup you like, you can store your settings as an easily recallable patch. You can connect the Blackstar Dept. 10 AMPED 3 to an 8- or 16-ohm speaker cabinet, or route a studio-quality miked-cab tone straight to your DAW via USB-C.
FEATURES
- Gain, Bass, Middle, Treble, ISF, and Master knobs give you ample sound-shaping options
- 3 channels (Clean, Crunch, and Overdrive) range from high-headroom clean to uber-saturated distortion
- 3-way Response switch tailors the feel of the power amp with EL84, EL34, and 6L6 characteristics
- 3-way Power switch selects between 100 watts, 20 watts, and 1 watt
- Footswitchable Boost can be positioned before or after the preamp
- Reverb with 2-way Dark/Light character switch
- Cab Rig speaker simulation re-creates a speaker, cabinet, mic, and room with no latency or phase mismatches
- Architect software allows you to deep dive into Cab Rig’s features
- Balanced mono XLR output, stereo TRS headphones output, and built-in 4-in/2-out USB-C audio interface
- 3-way Cab Rig selector switch and Level knob offer even more flexibility
- 2 x 9-volt DC outputs allow powering external pedals up to a combined 500mA
- 8- and 16-ohm speaker cabinet outputs
- Effects loop for integrating your pedalboard and rackmount gear
- MIDI I/O for sending and receiving MIDI CC messages
- Settings can be stored as an easily recallable patch
SPECIFICATIONS
- Type:Solid State
- Number of Channels:3
- Total Power:100W
- Reverb:Yes
- Effects:Boost
- EQ:3-band EQ
- Amp Modeling:Yes
- Number of Models:3 x Valve Response, ISF Control, 3 x Cab Rig Presets
- Inputs:1 x 1/4"
- Outputs:1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)
- Headphones:1 x 1/4" TRS (line out/headphone)
- Effects Loop:2 x 1/4" TS (+4dB, -10dB)
- MIDI I/O:2 x 1/8" (in, thru)
- USB:1 x Type-C (4-channel recording)
- Computer Connectivity:USB
- Software:Architect, CabRig
- Features:USB Audio Interface
- Construction Material:Aluminum Housing
- Power Source:Standard IEC AC cable, 2 x 9V 500mA Power Outputs
- Height:3.14"
- Width:11.22"
- Depth:5.9"
- Weight:3.88 lbs.
FAQ
Is warranty coverage available for my product?
Yes! Majority of our product provides a minimum 1 year warranty on the electronic parts.
Can I test the product prior to my purchase?
Definitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you here!
Is a power supply needed for the pedals?
We highly recommend you to connect to a power supply for your pedal(s). This minimizes the hum and ensure that your pedals get the cleanest power supply with optimum output and tone.
How long will it take to deliver?
It usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!
Can I self-collect my item(s)?
Of course! You can head over to Music Bliss showroom for self-collection during our working hours.
10am - 7.30pm (Mon - Thurs)
10am - 7pm (Fri - Sat)
10am - 6pm (Sun)
Can I use Lalamove / Grab / Same Day Delivery as a delivery option?
Yes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove/Grab service or contact the mainline 016-3111286.
Original: $521.90
-70%$521.90
$156.57Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Blackstar Dept. 10 AMPED 3 100-watt Guitar Amplifier Pedal
The Blackstar Dept. 10 AMPED 3 is a gig-worthy 100-watt guitar amp head that fits easily on your pedalboard. This floorboard amplifier faithfully re-creates the tone and feel of a traditional tube amp, with three distinct channels — with two selectable voices per channel — that range from high-headroom clean to saturated distortion. There’s plenty of sound shaping onboard, including a 3-band EQ, Presence, and Blackstar’s trademark ISF control. Three distinctively different power amp responses ensure an authentic amp-like feel to match the AMPED 3’s killer tone. You also get footswitchable Boost and Reverb, plus a high-quality effects loop, MIDI control, and 9-volt pedal power outputs. To top it off, this guitar amplifier pedal includes Blackstar’s next-gen Cab Rig DSP speaker simulation. Best of all, when you find a sound and setup you like, you can store your settings as an easily recallable patch. You can connect the Blackstar Dept. 10 AMPED 3 to an 8- or 16-ohm speaker cabinet, or route a studio-quality miked-cab tone straight to your DAW via USB-C.
FEATURES
- Gain, Bass, Middle, Treble, ISF, and Master knobs give you ample sound-shaping options
- 3 channels (Clean, Crunch, and Overdrive) range from high-headroom clean to uber-saturated distortion
- 3-way Response switch tailors the feel of the power amp with EL84, EL34, and 6L6 characteristics
- 3-way Power switch selects between 100 watts, 20 watts, and 1 watt
- Footswitchable Boost can be positioned before or after the preamp
- Reverb with 2-way Dark/Light character switch
- Cab Rig speaker simulation re-creates a speaker, cabinet, mic, and room with no latency or phase mismatches
- Architect software allows you to deep dive into Cab Rig’s features
- Balanced mono XLR output, stereo TRS headphones output, and built-in 4-in/2-out USB-C audio interface
- 3-way Cab Rig selector switch and Level knob offer even more flexibility
- 2 x 9-volt DC outputs allow powering external pedals up to a combined 500mA
- 8- and 16-ohm speaker cabinet outputs
- Effects loop for integrating your pedalboard and rackmount gear
- MIDI I/O for sending and receiving MIDI CC messages
- Settings can be stored as an easily recallable patch
SPECIFICATIONS
- Type:Solid State
- Number of Channels:3
- Total Power:100W
- Reverb:Yes
- Effects:Boost
- EQ:3-band EQ
- Amp Modeling:Yes
- Number of Models:3 x Valve Response, ISF Control, 3 x Cab Rig Presets
- Inputs:1 x 1/4"
- Outputs:1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)
- Headphones:1 x 1/4" TRS (line out/headphone)
- Effects Loop:2 x 1/4" TS (+4dB, -10dB)
- MIDI I/O:2 x 1/8" (in, thru)
- USB:1 x Type-C (4-channel recording)
- Computer Connectivity:USB
- Software:Architect, CabRig
- Features:USB Audio Interface
- Construction Material:Aluminum Housing
- Power Source:Standard IEC AC cable, 2 x 9V 500mA Power Outputs
- Height:3.14"
- Width:11.22"
- Depth:5.9"
- Weight:3.88 lbs.
FAQ
Is warranty coverage available for my product?
Yes! Majority of our product provides a minimum 1 year warranty on the electronic parts.
Can I test the product prior to my purchase?
Definitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you here!
Is a power supply needed for the pedals?
We highly recommend you to connect to a power supply for your pedal(s). This minimizes the hum and ensure that your pedals get the cleanest power supply with optimum output and tone.
How long will it take to deliver?
It usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!
Can I self-collect my item(s)?
Of course! You can head over to Music Bliss showroom for self-collection during our working hours.
10am - 7.30pm (Mon - Thurs)
10am - 7pm (Fri - Sat)
10am - 6pm (Sun)
Can I use Lalamove / Grab / Same Day Delivery as a delivery option?
Yes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove/Grab service or contact the mainline 016-3111286.

















