Background Music PA System JBL VMA1240 240W Bluetooth Mixer Amplifier with JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speakers for Cafe, Restaurant, Bistro, Retail, Showroom

---

FEATURES

• 1x JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier
• 2x JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black

JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier :

• 5-Input Mixer
• Supports USB Drives and Bluetooth
• 240W, 1-Output Amplifier
• Euroblock, RCA, and 1/4" Inputs
• Euroblock Outputs
• Per-Channel Bass and Treble Controls
• Voice-Activated Ducking
• Front-Panel Display and Controls
• Configurable Output Routing

JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black :

• 5.25" Woofer and Dual 0.75" Tweeters
• 100W Long-Term Power Handling
• Wide 160 x 150° Pattern Control
• HST Eliminates Primary Wall Reflection
• Weather-Resistant IP54 Rating
• Integrated 60W Multi-Tap Transformer
• Supports 70V, 100V, or 8-Ohm Operation
• Passive High-Slope Crossover Network

---

SPECIFICATIONS

JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier :

• Output Power : 240 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD)
• Insertion Loss : 70 V and 100 V Outputs: 1 dB maximum
• Input Channels : 5
• Output Channels : 1
• Tone Controls : Bass and Treble non-detented potentiometers on each channel | Bass : ±14 dB @ 50 Hz | Treble : ±14 dB @ 10 kHz
• Input Sensitivity : To obtain full rated power (load of 8 Ohms) | Mic Input : 5.5 mVrms | Line Input : 1.3 Vrms | RCA Input (Stereo In) : 130 mVrms
• Frequency Response : Measured at 2.83 Vrms into rated load impedance at any output | 4/8 Ohms Output : 20 Hz to 20 kHz, ±2 dB | 70 V/100 V Outputs : 80 Hz to 15 kHz ±3 dB
• Total Harmonic Distortion (THD) : Measured at 2.83 Vrms into rated load impedance at any output | Power Amp Output
• Signal-to-Noise Ratio : >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)
• Input Impedance : Nominal Mic : 400 Ohms | Line : 20 kOhms (balanced) | RCA : 50 kOhms
• Phantom Power : 27 VDC
• Crosstalk : -70 dB (reference rated power, volume at mid position, 1 kHz)
• Nominal Input Voltages : Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
• Minimum Load Impedance : Low Impedance Output: 4 Ohms | 70 V Output : 20 Ohms | 100 V Output : 40 Ohms
• Operating Temperature : 32 to 95°F / 0 to 35°C
• Humidity : 95% RH (non-condensing)
• Storage Temperature : -4 to 185°F / -20 to 85°C
• Dimensions (W x D x H) : 17 x 16.3 x 3.5" / 432 x 415 x 88 mm

JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black :

• Frequency Range (-10dB) : 50 Hz – 20 kHz
• Frequency Response (±3 dB) : 68 Hz – 18 kHz
• Coverage Angle : 180° H x 160° V (1 kHz – 2 kHz, nominal) 160° H x 150° V (ave, 1 kHz – 16 kHz)
• Directivity Factor (Q) : 5.4 (1 k – 16 kHz)
• Directivity Index (DI) : 7.2 dB (1 k – 16 kHz)
• System Power Rating (IEC) : 100 W (400 W peak), 2 hrs. 75 W (300 W peak), 100 hrs.
• Sensitivity : 88 dB (Ave. 80 Hz – 20 kHz)
• Maximum SPL (1m) : Direct 8Ω: 108 dB (peaks of 114 dB) 60 W Tap: 97 dB @ 60W
• Crossover Network : 1.6 kHz, 3rd order (18 dB/oct) high-pass to HF, 2nd order low-pass to LF
• Impedance : 8 ohms
• Transformer Taps : 70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W
• Drivers : LF: CMMD™ ceramic metal matrix diaphragm cone, 25 mm (1 in) voice coil. | HF: Two splayed tweeters with CMMD-treated aluminum diaphragms, polyurethane surround, polyimide bobbin, neodymium magnet, and fluid-cooling.
• Enclosure : Fiberglass-reinforced ABS
• Attachment : Four M6 points for included U-bracket. Additional M6 insert point provided for adding secondary safety attachment cable. U-bracket must be utilized. Must be mounted on wall surface. Do not mount on pole.
• Grille : Aluminum grille, painted to match cabinet color.
• Input Connectors : Removable locking euro-block 4-pin connector with screw-down terminals for bare wire. Two pins for input and two pins for parallel loop-thru. Max. wire 12 AWG (2.5 mm2).
• Outdoor Capability : IP54 per IEC529. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray.

---

FAQ

Is warranty coverage available for my product?

Yes! Majority of our product provides a minimum 1 year warranty on the electronic parts.

Can I test the product prior to my purchase?

Definitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you over!

How long will it take to deliver?

It usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!

Can I self-collect my item(s)?

Of course! You can head over to Music Bliss showroom for self-collection during our working hours.
10am - 7.30pm (Mon - Thurs)
10am - 7pm (Fri - Sat)
10am - 6pm (Sun)

Can I use Lalamove / Grab / Same Day Delivery as a delivery option?

Yes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove/Grab service or contact the mainline 016-3111286.